Filter
Top Products
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN P
A
TENT APPLICA
TIONS PENDING. CURRENT CANADIAN P
ATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Defender Safety System
®
, ScreenLok
®
, Vitraglas
®
and Hydrojet
®
are registered trademarks of Bradford White
®
Corporation.
700-B 1008
Light Duty Commercial Atmospheric Vent
Energy Saver Gas Water Heater
The Light Duty FVIR Defender Safety System
®
Models Feature:
■ A
dvanced ScreenLok
®
T
echnology Flame Arrestor Design—
F
lame
arrestor is designed to prevent ignition of flammable vapor outside of the
water heater.
■ Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of
the combustion chamber or restricted air flow.
■ Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
■ Pedestal Base—Rugged and durable base allows easy transport, positioning,
and provides corrosion resistant contact with floor.
■ Maintenance Free—No regular cleaning of air inlet openings or flame
arrestor is required under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
■ Factory installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank. Increases
first hour delivery of hot water while minimizing temperature build up in tank.
■ Vitraglas
®
Lining—Bradford White water heater tanks are protected from the
corrosive effects of hot water by an exclusive ceramic porcelain-like coating.
The Bradford White high silica Vitraglas
®
lining provides a tough interior
surface for our water heater tanks.
■ Precise Temperature Control—Adjustable thermostat to any temperature up
to 180°F. An auto-reset Energy Cut-Off (ECO) shuts off all gas in the event of
an overheat condition (Not recommended for 180°F sanitizing).
■ Side Connections—3/4" NPT tappings allow easy connections for space
heating applications (potable water only).
■ 2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Water Connections—3/4" NPT factory installed true dielectric fittings extend
water heater life and eases installation.
■ Factory Installed Heat Traps—Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation.
■ Pr
otective Magnesium Anode Rod—
Pr
ovides added protection against
cor
rosion for long trouble free service.
■ “Snap Lock” Draft Diverter.
■ Flue Baffle—Maximizes the amount of heat absorbed by the tank and
reduces heat loss during standby periods.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
■ T&P Relief Valve—Installed.
■ Brass Drain Valve.
■ Design Certified by CSA International (formerly AGA/CGA).
Photo is of
65T-65FB-3N
3 or 5-Y
ear Limited Tank Warranties / 1-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the war
ranty included with the heater
.