Residential Wall Hung
Energy Saver Electric Water Heater
The Wall Hung Electric Models Feature:
■ DOE—All residential storage models above 20 gallon capacity meet or
exceed efficiency requirements of the Department of Energy. ASHRAE
Standard 90.1 b (current standard) and the National Appliance Energy
Conservation Act of 1987 recent amendment effective January 20, 2004
which supercedes all state and local efficiency requirements.
■ Fully Automatic Controls—Fast acting surface-mount thermostat for
automatic temperature control. Factory installed sensitive manual reset
energy cut-off for safety to prevent overheating.
■ Direct Heat Transfer With a Single Immersed Element—Transfers heat
directly and efficiently to the water. Screw-in style element.
■ Vitraglas
®
Lining—Bradford White water heater tanks are protected from
the corrosive effects of hot water by an exclusive ceramic porcelain-like
coating. The Bradford White high silica Vitraglas
®
lining provides a tough
interior surface for our hot water tanks.
■ 1" Non-CFC Foam Insulation—Surrounds the tank surface, saving energy
by retarding loss of heat (30 gallon model has 2").
■ Factory Installed Heavy Duty Wall Mounting Bracket—no additional
brackets or modifications required.
■ Water Connections—3/4" NPT factory installed true dielectric fittings
extend water heater life and eases installation. Located on the bottom for
easier installation.
■ Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■ Steel Tank—Heavy gauge steel automatically formed, rolled, and welded.
■ Voltages Available—120V, 208V, 240V, 277V, 480V.
■ Single Phase Operation Only.
■ T&P Relief Valve Opening—All models have special tapping on side
of tank.
Photo is of
M-1-WH6U6SS
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the war
ranty included with the heater
.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN P
A
TENT APPLICA
TIONS PENDING. CURRENT CANADIAN P
ATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Vitraglas
®
is a registered trademark of Bradford White
®
Corporation.
216-B-0108-A
Bradford White received the highest numerical score among water heater/boiler manufacturers in the proprietary J.D. Power and Associates/ McGraw-Hill Construction 2006 HVAC and Water Heater/Boiler Subcontractor Satisfaction Study
SM
.
Study based on 882 r
esponses measuring 3 water heater/boiler manufactur
ers and measur
es opinions of subcontractors. Pr
oprietar
ystudy r
esults are based on experiences and perceptions of subcontractors surveyed in May through July 2006. Your
experiences may vary. Visit jdpower.com
"Highest in Subcontractor Satisfaction among Water Heater/Boiler Manufacturers"
Copper Screw Type Immersion Element
(Incoloy type immersion element available upon request)