Filter
Top Products
-7-
canister. Make sure that the plastic bag does
not interfere with the canister latches.
5. Re-attach the control unit.
6. Lock the canister latches.
1. Unlock the canister latches and remove the
control unit.
2. If plastic bag is used,
• First, remove hose and place hose port cap
into hose port to contain dust.
• Second, gather the top of the bag from the
rim of the canister, twist the top of the bag to
seal the contents.
• Finally, tie off the bag with the connector tie
that is attached to the side of the plastic bag.
3. Pull the dust bag away from and off of the
internal port hose.
4. Close the opening in the dust bag by folding
down the dust bag clip into opening.
5. Remove bag and dispose of properly.
FIG. 3
FIG. 4
BM 2610024876 04-12_BM 2610024876 04-12.qxp 4/5/12 9:14 AM Page 7