-9-
4)6%8-2+27869'8-327
,):%'991'0)%2)6,%7*39634)6%8-2+
13()7
• Normal Vacuuming Mode
• Power Tool Activation Mode
• Pulse-Clean Filter Cleaning Mode
• Pulse-Clean Filter Cleaning Combined with
Power Tool Activation Mode
:3-(%''-()28%078%68-2+
)796):%'991%2(8330
7;-8',)7%6)&)*36)409++-2+-236
4988-2+:%'9917;-8',-28343;)68330
%'8-:%8-3213()36*-08)6'0)%2-2+13()3
238/))443;)68330409++)(-2838,)
:%'991'0)%2)6B743;)683303980)8(96-2+
2361%0:%'991-2+Plugging in vacuums or
tools that have the switch ON invites accidents.
!,)297-2+8,-7:%'991
*36)%(%7)(%-28
)23:%8-32)4%-6%2(%-28-2+63+6%1
8,-7:%'991-72386)'311)2()(
*36:%'991-2+'%64)87%2(69+7
38 79-8%&0) 83 :%'991
,%>%6(397 36 83<-'
79&78%2')736(9787)+%7&)7837 Neither
the standard VAC012 Filter Cartridges or the
optional VAC019 HEPA Filter Cartridges are
able to capture all particles and may exhaust
them back into the environment.
;-8',-2+8,)2-82 Set mode selector
switch to ON.
;-8',-2+8,)2-8** Set mode selector
switch to OFF.
!
In the Power-Tool Activation mode, when the
power tool is switched on, the power tool
automatically switches on the vacuum cleaner.
!
!
The Power Broker feature allows optimal
allocation of the power available between the
vacuum cleaner and power tool on either 15-
Amp or 20-Amp circuits:
Before connecting power tool, set POWER
BROKER™ dial as follows:
1. Get tool amp rating from tool dataplate.
2. Subtract tool amp rating from building
circuit’s amp rating.
3. Set dial to the difference.
38)7
• The building's circuit breaker can trip if the
combination of power tool amp rating and
the dial setting exceed the building circuit's
amp rating.
• The dial should be set at 11 amps unless
the building circuit's amp rating minus the
power tool amp rating setting is less than 11
amps.
• If full vacuum cleaner power is needed with
a power tool that draws high amps, it may
be necessary to plug the power tool into a
!
WARNING
!
WARNING
FIG. 7
!
WARNING
BM 2610022228 04-12_BM 2610022228 04-12.qxp 4/12/12 10:52 AM Page 9