Filter
Top Products
– 19 – A1 February 03/Trb
8 Notes
English
8.1 General
If errors or malfunctions occur, the plug-in connectors should be checked first.
A malfunction can sometimes be cured by briefly unplugging and re-plugging
the power cord on the unit.
The unit may not be opened. Guarantee claims are rendered invalid if the seal
is broken.
Description of the LEDs: See the Functions chapter.
Superimposed malfunction indications for video signal malfunctions
= Camera blinded
= Scene lighting level too low
= Signal/noise ratio too low
= No video signal present
Reset to default setting
Unplug contact plugs and power supply from unit. Keep rotary switch pressed,
plug power supply back in. The green LED lights. Keep the rotary switch
pressed until the red LED lights (or blinks if an object is detected
simultaneously). Immediately rotate the still-pressed rotary switch, wait until the
red LED goes out and release the rotary switch. When the live image appears,
the reset procedure is finished.
Notes
The video movement sensor is delivered with software already installed. For
questions about the product, please consult your dealer.
Cleaning
Protect the unit from dust and moisture. Do not use aggressive cleaning
agents.
All unusable parts of the video systems must be professionally
disposed of.