Filter
Top Products
DinionHD 1080p HDR Installation | en 27
Bosch Security Systems Installation Manual AM18-Q0614 | v1.0 | 2012.03
5.9 Data connector
Figure 5.9 Data connector pins
The data connector is used to connect the control data coming
out of the camera to external devices. RS485, RS422, and
RS232 is supported by this data connection.
Note:
To ensure surge and electrostatic protection, keep the cable
length between the camera and external device to less than 3
meters.
Pin Data socket
1Ground
2RxD / Rx+
3CTS / Rx-
4Ground
5 TxD / Tx-
6 RTS / Tx+
5 mm
(0.2 in)
Data
456
123