Filter
Top Products
Bosch Security
Systems
| 08 Ma
y
2013
EN
|
12
LTC 5136 Series |
Instruction Manual
| Controller Operation
CAMERA key:
This key is only used to correct an
error
when
selecting
a camera number. If another key
is
inadvertently
pressed when a camera
selection
is
being
made, the
Camera
button may be pressed to put
the
Controller immediately
back into camera
selection
mode.
Normally,
a camera
selection
is made
by
entering
the desired camera number using the
numeric
keypad,
then
pressing
ENTE
R
.
SHOT
key:
This key is used to recall
pre-position
scenes of all
AutoDome
cameras and
Allegiant
S
eries
Receiver/Drivers
that are equipped with this
option.
Press SHOT, then enter the desired
pre-position
number on the numeric
keypad
(1 to 99). P
ress
ENTER to recall a
previously
stored camera
position.
Certain pre-position
numbers are also used to
program
certain
AutoDome
features. Refer to the
A
utoD
ome
operation
manual for a complete listing of the
available
features.
ON
key:
This key is used to
activate auxiliary functions
of the
AutoDome
cameras and
Allegiant
S
eries
receiver/drivers.
Press ON, then enter the
desired
auxiliary
number on the numeric
keypad,
and
press
ENTER to complete the
action.
Certain auxiliary
numbers are also used to
program
certain
AutoDome
features. Refer to the
A
utoD
ome
operation
manual for a complete listing of the
available
features.
OFF
key:
This key is used to
deactivate auxiliary
functions of the
AutoDome
cameras and
Allegiant
Series
Receiver/Drivers.
Press OFF, then enter
the
desired
auxiliary
number on the numeric
keypad, and
press ENTER to complete the
action.
Certain auxiliary
numbers are also used to
program
certain
AutoDome
features. Refer to the
A
utoD
ome
operation
manual for a complete listing of the
available
features.
NUMERIC
keypad: These keys are used to
enter
numeric data. When the first numeric key is
pressed,
the LED
display
will become a data
display and
indicate
the numeric value
pressed.
ENTER key: This key is used to
terminate commands.
When using the ON or OFF function, holding this
key
will cause the function to repeat until the key
is
released.
This feature is useful where
auxiliary
functions are
associated
with level type
camera
adjustments.
CLEAR key:
This key is used to clear
invalid
entries.
In
some cases, it can be pressed twice. If there is
numeric
data in the camera
display,
the first push clears
this
data,
and the second push returns the
Controller
to
the
camera mode. This allows the operator to
clear
incorrect
data
without leaving
the current mode.
If
there
is no data in the LED
display,
the first
push
clears the entire
Controller,
back to the default
state.
FOCUS and IRIS
keys:
These rocker
switches
are
used
to control the lens focus and iris
functions.
Joystick:
Movement
of the
joystick
left or right
will
pan
the selected camera left or right.
Movement
of
the
joystick
up or down will tilt the camera up or
down.
Rotation
of the
joystick
knob will move the zoom
lens
in or
out.
If the camera is capable of
variable
speed
operations,
the degree of
joystick deflection
(or rotation)
will
correspond
to different speed
responses.