Filter
Top Products
Solution 64
2
Bosch Security Systems 09/06 BLCC110U
User Guide
Copyright Notice
Unless otherwise indicated, this publication is the copyright
of Bosch Security Systems Pty Ltd (“Bosch”). All rights are
reserved.You may download a single copy of this publication.
By downloading the publication you agree that you will: (i) only
use the publication for your own reference; (ii) not commercially
exploit or charge any person for the use of the publication;
and (iii) not modify the publication in any way without the
prior written permission of Bosch. Except as specified above or
where authorised by the Copyright Act 1968 (Cth), no part of
this publication may be reproduced, transmitted, modified or
stored in any form or by any means, without the prior written
permission of Bosch.
Trademarks
Throughout this document trademark names may have been
used. Rather than put a trademark symbol in every occurrence
of a trademark name, we state that we are using the names only
in an editorial fashion and to the benefit of the trademark owner
with no intention of infringement of the trademark.
Notice of Liability
While every effort has been taken the accuracy of this document,
neither Bosch Security Systems Pty Ltd nor any of its official
representatives shall have any liability to any person or entity
with respect to any liability, loss or damage caused or alleged
to be caused directly or indirectly by the information contained
in this book. Should you find any error on inconsistency, please
notify us accordingly.
Bosch Security Systems Pty Ltd reserves the right to make
changes to features and specifications at any time without prior
notification in the interest of ongoing product development and
improvement.
Telepermit Note
The grant of a Telepermit for a device in no way indicates Telecom
acceptance of responsibility for the correct operation of that
device under all operating conditions.
This equipment shall not be used in any manner that could
constitute a nuisance to other Telecom customers.
Immediately disconnect this equipment should it become
physically damaged, and arrange for its disposal or repair.
The transmit level from this device is set as a fixed level and because
of this there may be circumstances where the performance is less
than optimal. Before reporting such occurrences as faults, please
check the line with a standard telepermitted telephone.
Warnings
1) This product must be installed by a qualified and licensed
security installer.
2) This product may not perform as expected if installed
incorrectly.
3) Some features of this product require a working
telephone line to operate and telephone communication
service provider charges may be applicable.
4) Australian standard AS 2201 require regular service by
qualified and licensed security persons and regular user
testing. Please consult your security alarm company for
further details.
5) Incorrect programming of options can result in operation
contrary to what may be desired.
6) Leave the mains adapter plugged in at all times.
7) Leave the telephone line plugged in at all times under
normal conditions.
Notice to Owner
Thankyou for selecting the Solution 64 Security Control Panel for your security needs. Your system includes many advanced features and
functions which will be programmed and configured by your security consultant during installation. Depending on the configuration,
and your access level, you may have the ability to program certain features within the system to suit changes in your security needs.
For example you may wish to change a User Name or PIN number when a staff member leaves.
This manual explains all aspects of system operation as well as detailling the various programming options available to you. We ask that
you take the time to read this manual carefully and that you have your installer explain the basic system operation and configuration
to you when the installation is complete.