Bosch Appliances 800 Home Security System User Manual


 
22 en | Analog Camera Firmware Updates via the CTFID
F.01U.097.269 | 4.0 | 2012.02 Firmware Update Manual Bosch Security Systems, Inc.
5. Click the Upload Firmware button, and acknowledge the Warning message to start
uploading the Language Table file.
Figure 2.24 Upload Language table
6. The AutoDome disconnects and proceeds through its homing process, and then restarts.
During this time DO NOT CLICK ANYTHING! The camera reconnects automatically to the
CTFID.
Note: Do not click on any buttons while the camera is uploading. The CTFID removes the
Load Configuration window after the camera reconnects.
7. Once the Language Table file has successfully uploaded, click OK to close the message.
2.4.8 Changing the OSD Language
There are two methods to change the on-screen-display (OSD) language:
1. From the CTFID Main window:
a. Click the Online Config button on the left side of the window.
b. Click on Display - Setting Group 1.
c. Select the appropriate OSD language from the Language drop down menu.
Note: The Language button on the Main CTFID window changes the language for the
CTFID user interface, It does not change the OSD menu.
2. From the AutoDome 600 OSD menu:
a. Enter ON-46-ENTER from a control keyboard to open the Main window.
b. From the Main window select Language menu.
c. Select the appropriate Language from the menu.