Filter
Top Products
Blueair ECO10 5
Settings
To turn on the Blueair unit, plug the cable into a grounded three-prong
wall outlet. The blue light-emitting diode indicates that the unit is turned
on. Set the control knob to maximum speed for a few minutes of fast
initial cleaning.
Then adjust the control to the desired speed. Maximum speed is recom-
mended for daytime use, for fast initial cleaning or for very polluted air.
Minimum speed is generally recommended for nighttime use.
For best results, run your Blueair unit 24 hours a day, 7 days a week.
Round-the-clock operation ensures that a continuous supply of clean,
filtered air constantly circulates throughout the room.
Care and maintenance
Blueair air purifiers feature award-winning Swedish design, materials
and workmanship. To keep your unit in top condition, we recommend
routine cleaning to keep your Blueair unit looking good and working
well.
• Vacuum the air intake grille from the inside when you remove
the filters to replace them.
• Vacuum the small inlets with a soft brush attachment.
• Wipe the exterior of the unit with a soft, clean, damp cloth.
• Never clean with gasoline, chemical solvents or corrosive ma
terial also as these agents may damage the surface.
• Do not allow foreign objects to enter the ventilation or exhaust
openings. This may cause electric shock or damage the unit.
• Do not try to repair or adjust any of the electrical or mechanical
functions on your Blueair unit yourself. Contact your local
dealer or Blueair for warranty information.