Blueair 501 Air Cleaner User Manual


 
Do not allow foreign objects to enter the ventilation or exhaust openings. This may
cause electric shock or damage to the unit.
Never try to repair or adjust any of the electrical or mechanical functions on your
Blueair 501/Blueair 601 yourself. Contact your local dealer or Blueair for service
center information.
Use only authorized Blueair filters.
USING YOUR BLUEAIR
Place the unit in a location that allows air to circulate freely in, out and around the unit.
Do not place the unit:
Directly on or against soft furnishings (such as bedding or curtains).
Near electronically sensitive devices such as a computer (within 6˝/10cm).
Near sources of heat (such as radiators, fireplaces or ovens).
Near oxygen tanks or other combustible gases.
Do not let the Blueair come in contact with water. It is not designed for use outdoors or
in wet areas (such as bathrooms).
SETTINGS
When turning on the Blueair after the unit has been off, turn the speed control to max speed for
a few minutes of fast initial cleaning. Then adjust the control to the desired speed:
Minimum speed HEPASilent (for nighttime use)
Moderate speed (for daytime use)
Maximum speed (for fast initial cleaning or very polluted air)
For best results, run your Blueair 501/Blueair 601 24 hours a day, 7 days a week. Continuous
operation means you get a continuous supply of clean, filtered air circulating throughout the
room.
Blueair501/Blueair601