Filter
Top Products
6
Owner’s manual and assembly instructions: 71400 portable outdoor heater 3/3/03
Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 2–Attach Top Wire Guard
• Line up 4 prongs on Wire Guard Bottom with 4 holes on Emitter
Bottom, and Insert.
Note: It may be necessary to adjust the prongs slightly to line them up
with the holes.
Step 3–Attach Dome to Emitter
• Line up three studs in Emitter with holes in Dome. Slide Dome
carefully over studs, clamping Top Wire Guard securely in place.
Note: It may be necessary to adjust prongs of the Top Wire Guard
slightly to provide a secure fit.
• Install (3) Cap Nuts on studs and tighten with 7/16” wrench.
Do not over tighten.