Filter
Top Products
9
other surfaces, start with a medium grit. In both cases, gradually change to a fine grit
for a smooth finish.
belt grits to use with different materials.
MATERIAL BELT GRIT
Solid Wood 80
Veneer 150
Chipboard 60/80
Plastics 100
Steel 80 (remove dust bag)
Paint Removal 40/60
Balsa Wood 100
Acrylic 100
Tool Care And Maintenance
Never apply excessive force when you use your sander. Too much force can result in an
overload and cause damage to the motor or the workpiece. Always keep the air cooling
vents clear. To clean your belt sander, proceed as follows:
WARNING:
To prevent accidental operation, turn off and unplug sander
before performing the following operations. Failure to do this could result in serious
personal injury.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
ACCESSORIES
Use only 1/2in. x 18in. (13mm x 457mm) sanding belts. Recommended accessories for
use with your tool are available at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory for your tool, please call
1-800-544-6986.
CAUTION:
: The use of any other accessory not recommended for use with this
tool could be hazardous.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and authorized service locations
throughout North America. All Black & Decker Service Centers are staffed with trained
personnel to provide customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory replacement parts,
contact the Black & Decker location nearest you. To find your local service location, refer
to the yellow pages directory under “Tools—Electric” or call: 1-800-544-6986.
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no charge
in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should
be made within the time period of the retailer’s policy for exchanges (usually 30 to 90
days after the sale). Proof of purchase may be required. Please check with the retailer for
their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned
or authorized Service Center for repair or replacement at our option. Proof of purchase
may be required. Black & Decker owned and authorized Service Centers are listed
under “Tools-Electric” in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal