4
To unwrap and extend the handle and hose:
The handle and hose can be unwrapped from the
handle and hose from the main appliance. The hose
To place the handle and hose back onto the main
appliance, wrap the hose back underneath and
around the vac making sure that the hose fits
between the two “feet” of the appliance. Align the
handle with its cradle and click back into place.
allowing the accessories to be connected directly to
To remove the handle:
to
release the clips.
To refit the handle:
OPERATION
CONNECTING TO THE VEHICLE’S POWER
SUPPLY
SWITCHING ON AND OFF
NOTE:
affecting the power of a normally charged car battery in good condition.
CAUTION:
industrial use.
VACUUMING
blocked.
MAXIMIZING THE SUCTION FORCE
during use.
TROUBLESHOOTING
If the product does not work, follow the instructions below. If this does not solve the
C
2
9
13
13
B