Filter
Top Products
6
ENGLISH
The Fan guard can also be positioned vertically
depending upon the direction of flow desired.
For this switch OFF the fan first, let the fan
come to halt, then with one hand hold the stand
and with the other hand, move the guard
assembly up or down depending upon the
desired angle required. To make the fan
oscillate pin down. To make it stop oscillation,
pull it up.
ON/OFF button
Your fan can be controlled by pushing
the buttons, which can be set on the
Control panel or on the Remote
Control.
Press the On/Off button once to operate the fan
and once again to make the fan stop running.
Speed button
Your Fan has a speed control
button to keep the desired air
flow through your room. The
speed of the fan can be adjusted by pressing
the button. The speed will be displayed on the
LCD. To increase the speed press the ” + “
button continually until it reaches the maximum
of 4.To decrease the speed press the “ _ ”
button continually until the running speed
reaches the minimum of 1. The can be operated
by remote control as well fan.
Timer
The timer can be used to set the running time of
the fan, which can vary from 1 to 8 hrs. The
number of times the timer button is pressed will
set the running time which
will be displayed on the LCD.
For example: If the timer is
pressed once, the operating
time will be set at 1hr and if
the timer is pressed 4 times,
the operating time will be set
at 4 hours. The can be
operated by remote control
as well fan.
The Fan guard can also be positioned vertically
depending upon the direction of flow desired.
For this switch OFF the fan first, let the fan come
to a halt, then with one hand hold the stand and
with the other hand, move the guard assembly
up or down depending upon the desired angle
required.
To make the fan oscillate, press the oscillation
pin down. To make it stop oscillation, pull it up.
Remote control
Please inset 2’AAA’ size batteries into the
remote as per making in the remote cavity.
Always face the LED on your remote towards
the fan when you are operating the fan with
remote.
To increase the speed, press the increase speed
button once with every press of button the speed
increases by onestep.Your fan is a four speed
fan.To run the fan at maxmimum speed , press
the “speed+” button four times. In similar
fashion, to reduce speed press the “speed_”
button.
Your remote also has timer control functions. As
explained under “Times” functioning, the “time+”
& ”time_” buttons can be operated to set the
running time of fan.
The On/Off button operates and switches off the
fan from your remote.
ON/OFF
-
+
TIMER
-
+
SPEED