Black & Decker FB1400 Fan User Manual


 
5
ENGLISH
Make sure your fan is switched off before
connecting to or disconnecting from the power
supply. Ensure that the voltage rating on the
base plate corresponds to the mains voltage at
your home.
Move the speed switch vertically upwards to
desired fan speed depending upon your
requirment.
This fan has three different speed settings for
optimum air cooling of your room.
0 - Off
1 - Low
2 - Medium
3 - High
The louvre can be made operational by rotating
the lower switch to the 'O’ position this giving an
all around circulation of air.
Extending Feet
In the base you will find the foot folded.inside.
Before operating the fan,unfold both the feet so
that it gives more stable standing to the fan.
Always extend the feet before using the fan.
Warning !
Never use the fan without the guard in place
or if the guard is damaged.
Do not touch moving parts
Always allow motor to stop before
approaching the blades or changing an
accessory.
Keep your fingers, long hair, loose clothes
and supply cord away from moving parts.
Never pull the power cord to disconnect the
plug from the socket.
Keep the power supply cord away from
heat, oil and sharp edges.
Do not place the appliance on or near heat
source or in a heated oven
Do not use the appliance outdoors. Always
protect the motor unit from water or
excessive humidity
Operate the appliance only with dry hands.
If the power supply cord is damaged during
use, disconnect the appliance from the
power supply immediately . Do not touch the
power supply cord before disconnecting
from the power supply.
When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliance.
Do not cover the rear housing of the fan with
any cloth or curtain.
Do not operate this unit in tropical climate or
in areas where the temperature exceeds
40ºC.
Technical Data
Voltage 220 – 240V ~ 50Hz
Power input 60W
Weight 4.29kg