5
Emptying and cleaning the product.
Removing the dust bowl and lters - Figures D & E
WARNING:
cleaned regularly.
straight off as shown in Figure D.
While holding the dust bowl over a bin or sink, pull out the
Figure E.
To replace the dust bowl, push it back onto the handle until
WARNING:
Pre-lter - Figure F
cleaned out regularly for optimum performance.
Cleaning the dust bowls and lters
Replacing the lters
MAINTENANCE
Use only mild soap and damp cloth to clean the vac. Never let
any liquid get inside the vac; never immerse any part of the
vac into a liquid.
WARNING: Make sure the vacuum is completely dry before using it.
IMPORTANT:
authorized service centers or other qualified service organizations, always using identical
replacement parts.
THE RBRC™ SEAL
center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.
2
D
E
F