3
with mild soap and water.
carbonates and lithium salts.
WARNING:
sometimes there is a possibility of small debris being discharged from the air vents, especially
after cleaning / replacement of the filters as debris inside the unit can be disturbed.
correctly orientated in a vertical or floor mount position.
SAFETY WARNINGS AND INSTRUCTIONS: BATTERIES
puncture, or shred.
soldering irons, or put in microwave oven.
O
nly use the battery / tool with a charging system specified by the manufacturer/supplier.
battery terminals simultaneously.
SAFETY WARNINGS AND INSTRUCTIONS: CHARGING
battery charger and product using battery.
CAUTION: To reduce the risk of injury,
causing personal injury or damage.
risk of fire, electric shock, or injury to persons.
when disconnecting charger.
otherwise subjected to damage or stress.
charger could damage the tool or create a hazardous condition.
are created when lithium ion battery packs are burned.
may ignite the dust or fumes.
SAVE THESE INSTRUCTIONS
SYMBOLS
• Thelabelonyourtoolmayincludethefollowingsymbols.Thesymbolsandtheirdefinitionsareasfollows:
V .................. volts A ...................amperes
Hz ................ hertz W ..................watts
min ..............minutes
or AC .......alternating current
or DC ..direct current
n
o .................no load speed
................Class I Construction ..................earthing terminal
(grounded)
................safety alert symbol
................Class II Construction .../min or rpm........ revolutions or reciprocation
(double insulated) per minute