Filter
Top Products
10
www.bissell.com 800.237.7691
Oxy Gen2 PowerTool™
To use the Oxy Gen2 PowerTool:
1. Pull out the rubber stopper in the tank.
2. Fill with Oxy Gen2
®
formula.
3. Replace the rubber stopper and attach the
tool to the hose grip.
4. Refer to page 9 “Ready Tools” steps 9-15.
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power switch OFF ( 0 ). Unplug the
machine and wrap the power cord.
2. After emptying the collection tank, rinse it
with running hot tap water, taking care to
clean all around the interior.
3. Clean out the lint screen if necessary by
wiping clean any visible residue.
4. Replace the collection water tank on the
machine.
4. Any loose hair or debris can be pulled from
the TLR PowerRoller and thrown away.
5. To clean the attachments, remove from hose
and rinse in clean, running water. Dry before
storing. Clean the hose by suctioning clean
water from the tap. Before wrapping back on
machine, lift end of hose and stretch out to
ensure all water is cleared from hose while still
suctioning.
6. Wipe the machine’s exterior with a soft cloth
and store properly, refer to page 11.
Operation
Maintenance and care
Lint Screen
Rubber Stopper
ug120-4080_7350_908.indd 10 10/14/08 1:26:00 PM