Filter
Top Products
Prepared by Monique Lania 2Care & Maintenance of Bissell Deep Cleaner
BS-7920F Pro Heat Pro-Tech
Cleaning of the Red Lint Filter
Prevent solution build up in the machine by flushing the machine after
cleaning your carpet.
Remove tank-in-tank assembly from unit
Remove the lid from tank and turn the lid upside down
Remove red lint basket from tank lid and remove any debris stuck in lint basket with your finger tips or
an old toothbrush. If it is really dirty soak in hot water for 30 minutes and replace it back into machine
Once clean the red lint filter basket must be clicked securely in place and sealed to ensure maximum
suction.
Fill the Tank-in-Tank with hot (not boiling) tap water and fill the SmartMix Bottle with tap water.
Switch grey SmartMix Switch located next to solution SmatMix bottle to
‘Normal’ and switch diverter knob to ‘Carpet Cleaning’ setting
Use the machine on hard surface such as concrete to suck up a quantity of clean
water. This will remove any solution build-up.
Empty collection tank and SmartMix bottle at the end of the procedure.