Bissell 6700 Vacuum Cleaner User Manual


 
5
8
Index
Safety instructions . . . . . . . . . .2
Product view . . . . . . . . . . . . . .3
How to put it together . . . . . . .4
Index . . . . . . . . . . . . . . . . . . . .5
Using special tools . . . . . . . . . .5
Operating/Maintenance . . . .6-7
Troubleshooting . . . . . . . . . . . .8
Replacement parts . . . . . . . . . .9
Warranty . . . . . . . . . . . . . . . .10
Consumer Services . . . . . . . . .10
WARNING: To reduce
the risk of injury from moving
parts and/ or electrical shock,
turn Power Switch OFF and
disconnect polarized plug from
electrical outlet before performing
troubleshooting checks.
Troubleshooting
This appliance was inspected thoroughly and was in
good operating condition when it was shipped from the
factory. If a minor problem occurs, it usually can be
solved quite easily when the cause is found. Therefore,
this check list is provided for your convenience.
Vacuum cleaner won’t run.
Possible Causes Remedies
Vacuum cleaner is not fully Plug in fully and turn switch to ON position.
plugged in
No voltage in wall plug Check fuse or breaker
Vacuum cleaner won’t pick up dirt.
Possible Causes Remedies
Dust Bag is full Change Dust Bag
Hose, Wands, Dust Cup or Floor Nozzle Remove substance
clogged with a large object
Before use, make sure that the position of the select button is
in the right position for the type of surface to be cleaned.
Push the side 1 when cleaning the carpets.
Push the side 2 when cleaning the floor, tile, mat, etc.
To use the Dusting Brush, remove the handle end of the Hose
from the top of the Dust Cup Bracket. Attach Dusting Brush to
hose end.
Rug/Floor Selector
Dusting Brush
1
a.
b.
c.
2
Special tools