Filter
Top Products
Quick Start Guide
1. Hold the tool 1 inch above soiled surface and spray
trigger to apply cleaning formula.
2. Gently scrub the area with brush on tool.
3. Apply downward pressure to the tool and pull it
toward you to suction up the dirt and cleaning
formula. Continue until no more dirt can be removed.
Quick Prep Steps
Assembly
1. Unwrap hose and select desired tool.
Tool easily snaps onto hose.
2. Remove tank from tool side of unit. Pull on
the black tab to remove rubber stopper and
reveal tank opening.
3. Your tank is marked for a large stain or a small
stain. Based on your cleaning need, fill with hot
tap water to the water fill line. Add BISSELL 2X
formula to the formula fill line.
4. Replace rubber stopper, then replace the tank
on the machine.
5. Twist the quick release cord wrap to release
the cord, plug in, and you’re ready to spot
clean!
Guidelines to Spot Clean
1. Slide flex hose clip into the opening on the
front of the machine until you hear a “snap.”
2. Snap the hose grip bracket into the back of
machine on the clean tank side. Wrap flex hose
around unit and snap hose grip into bracket.
3. Attach cord wrap by snapping it into place
on the dirty water tank side of the machine.
Wrap power cord around cord wrap.
Cleaning Formula
›› Always use genuine BISSELL portable deep cleaning
formulas. Non-BISSELL cleaning solutions may harm
the machine and will void the warranty.
www.BISSELL.com
800.237.7691
3