Filter
Top Products
19
www.bissell.com
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power and heater switches to the OFF
( O ) position. Unplug the machine and wrap
the power cord.
2. After emptying the 2-in-1 water tank, rinse
it out at a faucet with running hand hot tap
water, taking care to clean underneath the
heavy duty bladder and all around it.
3. The top half of the tank can be rinsed clean
through the nozzle area. Also, pop out the red
filter underneath the top half of the tank and
rinse that out. Replace before putting the top
and bottom halves of the tank together.
4. Before you place the cleaned 2-in-1 water tank
back onto the machine, simply unscrew the floor
nozzle using a Phillips head screwdriver. This
can be rinsed out at the faucet. Then replace
back onto the machine by starting from the
bottom of the nozzle and hooking the tabs into
the holes on the bottom sides of the machine.
Secure into place with the screw.
WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.
Filter
Tip:
Let all parts dry completely
before storing
3.
Maintenance and care
ug120-4042_9500E.indd 19ug120-4042_9500E.indd 19 5/7/08 3:37:48 PM5/7/08 3:37:48 PM