Filter
Top Products
www.bissell.com 800.237.7691
Maintenance and care
8
Disposal of batteries
If your Pet Hair Eraser Hand Vac
is to be disposed of, the batteries
should be removed and disposed of
properly.
1. IMPORTANT:
Remove from charging base and fully
discharge hand vacuum.
2. Remove dirt container from handle.
3. Remove (6) Phillips head screws on the
handle and cover.
4. Separate left and right cover.
5. Remove the entire battery assembly from
the cover.
6. Remove (3) Phillips head screws
between the motor and battery bracket.
7. Pull the motor, PCB, fuse, and inner
wire through the middle of the battery
bracket, separating the battery bracket
and both batteries from the motor, PCB,
and inner wire.
8. Cut wires from the PCB and fuse to the
battery bracket.
9. Keep Battery Pack together – DO NOT
separate individual batteries. For spe-
cific disposal instructions of batteries,
please contact RBRC (Rechargeable
Battery Recycling Corporation)
1-800-822-8837
or visit www.rbrc.com.
10. Discard remainder of product
CAUTION: Disconnecting the battery
will destroy the appliance and void the
warranty.
WARNING:
This product contains Nickel Metal Hydride (Ni-MH)
rechargeable batteries. According to Federal and State
regulations, removal and proper disposal of Ni-MH bat-
teries is required. For removal of the batteries in your
Pet Hair Eraser see instructions below.
TM
3.
6 screws