Filter
Top Products
11
www.bissell.com 800.237.7691
Maintenance and care
Cleaning the secondary cyclone
Unplug the cleaner from electrical outlet.
1. The secondary cyclone can be reached by
removing the dirt container, reaching underneath
the upper tank and turning the rim of the frame to
unlock. Pull straight down to remove.
2. The cyclone and screen may be separated
for cleaning. Simply pull up on the screen to
separate.
3. The upper tank may also be wiped clean
with a damp cloth.
1. Unplug the vacuum from electrical outlet.
2. The Pre-Motor Filter protects the motor from
dirt particles. It is located in the slide out tray
underneath the Dirt Container. If the filter
becomes dirty, pull out the tray, lift out the fil-
ter and clean. This filter may be hand washed
in cold water with mild detergent. Rinse well
and air dry thoroughly before replacing.
3.
The HEPA Media Post-Motor Filter assists in the
filtration process to return clean air to the
room. It is located behind the door on the back
of the cleaner. If the filter becomes dirty, open
the door, remove the filter and replace. The
HEPA Media Filter is not washable.
Cleaning the pre-motor and post-motor filter
Pre-Motor Filter
WARNING:
Do not operate cleaner
with damp or wet
filters or without all
filters in place.
HEPA Media
Post-Motor Filter
1.
2.
3.