Filter
Top Products
3.
Handle positions
Press the handle release pedal, located on the
lower left side of the vacuum, with your foot to
place your vacuum into one of three cleaning
positions.
1. Upright – For storage and above floor
cleaning with tools.
2. Normal Cleaning – Press handle release
pedal once. Position used for most
household floor cleaning tasks.
3. Low Cleaning – With the vacuum in normal
cleaning position, press handle release pedal
again. Use for reaching under low furniture
such as tables, chairs or beds.
Height adjustment
There are seven height settings available for
various floor surfaces. Turn the dial on the foot of
the cleaner to the desired setting.
Lowest setting – For low pile carpet or bare
floors. To pick up debris it may be necessary to
move up one setting.
Medium settings – For medium pile carpet.
High setting – For high pile and most shag carpet.
Note: For optimal carpet cleaning
performance, adjust to the lowest practical
setting. If your cleaner is difficult to push,
adjust to the next higher setting.
If the dial is difficult to turn, tilt the cleaner
back slightly to take the weight off the foot while
turning.
Transporting cleaner
1. To move your cleaner from room to room,
put the handle in the upright position, tilt the
cleaner back on its rear wheels and push
forward.
2. The cleaner can also be moved by using the
carrying handle.
Operation
7
w ww.b is se ll .c a 1 -8 00 -2 63 -2 53 5
Tip:
Before cleaning under low furniture, check
area first for objects that might harm the unit
or block the vacuum hose.
right way to carry wrong way to carry
2b.
2a.
1 .
2.
1.
DJ68-00375P (EN)-0.1.indd 7 09. 12. 03 �� 9:16