Filter
Top Products
www.bissell.com
7
Operations
Special tools
Your BISSELL Cleanview cyclonic bagless
vacuum is not only a powerful carpet
and rug vacuum cleaner, it’s also a ver-
satile above floor vacuum cleaner when
you select one of the special tools.
1. Raise handle to upright position.
2. Grasp the Quick Reach handle and lift hose
wand to separate from suction intake opening.
3. Attach tools by firmly pushing onto
vacuum hose or extension wand.
Combination Dusting Brush/Upholstery
Tool:
Two types of cleaning tools are included
in one attachment; rotate for desired tool.
■ Use brush side to dust furniture, blinds,
books, lamps, shelves and baseboards.
■ Use upholstery side for curtains, draper-
ies, cushions and fabrics.
Crevice Tool: Use in tight, narrow spaces.
Extension Wand: Use with desired attach-
ment for a longer reach.
TurboBrush tool:
(Select models only)
Use rotating brush action for small areas such
as stairs and upholstery.
NOTE: Press gently when using the
TurboBrush tool to gain maximum
cleaning. Too much pressure will
cause the brush to stop rotating.
Power cord
When you are done using your BISSELL
Cleanview Cyclonic Bagless vacuum,
return it to the upright position and
store the power cord.
1. Turn power switch OFF.
2. Unplug power cord by grasping the plug
(NOT the cord) and disconnect from outlet.
3. Loop power cord around cord wraps on
side of vacuum cleaner.
4. Clip molded plug to power cord to secure.
NOTICE:
The floor brush will continue to rotate while
you use your vacuum for above floor
cleaning. To prevent carpet damage, do
not lean on the vacuum or let the power-
foot tilt forward.
CAUTION:
The rotating floor brush continues
to rotate while tools are in use. To
reduce the risk of injury from mov-
ing parts, always move the cleaner
with the carrying handle at the
back of the cleaner. Always place
the vacuum cleaner on the floor
with the handle in upright position
when using tools. Never place your
fingers under the cleaner when it is
running. Never place powerfoot on
furniture or uneven surfaces. Do not
place vacuum cleaner close enough
to objects to pull them into rotating
brush.
Tip:
Hair, string and
small objects
can block the
vacuum hose or
tools. Check them
occasionally for
obstructions.
NOTICE:
While vacuuming, certain carpets and low
humidity conditions may generate small
static discharges. The discharges are entirely
harmless and are not associated in any way
with the main power supply.