Filter
Top Products
16
w ww.b is se ll .c om 8 00 .2 37 .7 69 1
Machine storage
1. Wrap power cord around Quick Release Cord
Wrap
™
on side of PowerEase.
2. Wipe all surfaces with a soft cloth. Store cleaner
upright in a protected, dry area.
NOTE: You may have cleaning solution
remaining in the solution tank. You may store
your PowerEase this way for the next cleaning
task, but never keep soiled solution in the col-
lection tank.
To install the replacement brush belt
1. Turn the machine off and unplug from wall outlet.
2. Remove solution and collection tanks.
3. Lie machine down to access the bottom of
the machine.
4. With a Phillips head screwdriver, unscrew the
brush cover and remove.
5. Remove the brush end cap and remove belt from brush.
6. Brush can now be removed.
7. Belt can be removed by sliding off the motor pulley.
8. Clean or replace belt. Attach belt to motor pulley
and brush, insert brush into right side end cap.
9. Reattach the left end cap and slide brush back
into place.
10. Replace the brush cover and screw into place.
8
Maintenance and care
CAUTION:
Do not store unit
where freezing may
occur. Damage to
internal components
may result.
WARNING:
To reduce the risk of injury
from moving parts and/or
electrical shock, turn power
switch OFF and disconnect
plug from electrical outlet
before performing maintenance
or troubleshooting checks.
4.
5. 5a.
6. 7.
8. 9.
Brush Cover