Filter
Top Products
14
www.bissell.com 800.237.7691
Maintenance and care continued
Brush reset
If something becomes lodged in the foot and the
brush shuts off, turn the cleaner off and unplug
from the outlet. Remove the obstruction. The
brush will automatically reset when the cleaner
is plugged in and turned back on.
Brush maintenance
The rotating brush should be checked regularly
for accumulating debris that might reduce the
cleaning performance of your vacuum.
1. Unplug cleaner from electrical outlet.
2. Recline the handle and turn your cleaner
over so the bottom side is up.
3. Carefully cut away any visible hair, fibers
or debris from the brush roll.
Do not attempt to disassemble the vacuum foot
or to remove the brush roll. If you feel it needs to
be checked or replaced, call BISSELL Consumer
Services or visit the website to locate an
authorized service center.
Belt maintenance
The brush belt is designed to last the useful life
of the cleaner when used according to all
instructions in the user guide under normal
household conditions. If you feel that it needs to
be checked or replaced, call BISSELL Consumer
Services or visit the website to locate an authorized
service center. Do no attempt to disassemble the
vacuum foot or to change the belt.
CAUTION:
To reduce the risk of injury
from moving parts, turn off
the vacuum cleaner and
disconnect power plug from
electrical outlet.
3
ug203-1369_5770_706.indd 14ug203-1369_5770_706.indd 14 7/25/06 12:45:48 PM7/25/06 12:45:48 PM