Filter
Top Products
16
w ww.b is se ll .c a 1 -8 00 -2 63 -2 53 5
Cleaning the filter
The key to maximum performance is having clean
filters. Cleaning the filters after each use will help
your 3-in-1 vacuum operate at peak efficiency.
Use only BISSELL replacement filters in your
BISSELL 3-in-1.
1. Turn Vacuum off (O).
2.
Follow the steps on page 5 to remove dirt
container and main filter. To clean the main filter,
shake over a waste container until debris is gone.
Replace the filter back into the dirt container.
Note: After heavy usage, you may clean the filter
by washing it gently by hand in warm water and
mild dish detergent. Rinse thoroughly and make
certain it is completely dry before replacing it. If
filter is torn, replace it with a new filter.
3. To clean the foam filter, lift out from the body of the unit.
This filter may be hand washed in cold water with mild
detergent. Rinse well and air dry thoroughly before
replacing. If filter is torn, replace it with a new filter.
4. Attach dirt container to vacuum by depressing
latch and serucely fitting onto hand vacuum grip.
Make sure dirt container is correctly secured.
6
Maintenance and care
CAUTION:
Never operate your 3-in-1 vacuum
without the filter in place. Doing so
may damage the motor and void the
warranty.
Troubleshooting
Vacuum cleaner won't run
Possible causes Remedies
1. Power Cord not firmly plugged in. 1. Check electrical outlet.
2. Blown household fuse or breaker. 2. Check/replace fuse; reset breaker.
Vacuum cleaner won't vacuum effectively
Possible causes Remedies
1. Filter clogged, wet or dirty. 1. Follow instructions for cleaning Filter.
2. Dirt Container clogged. 2. Follow instructions for emptying Dirt Container.
Dust blows out of the air vent
Possible causes Remedies
1. Filter not properly secured to filter frame. 1. Follow instructions for Replacing Filter above.
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service. Contact
us directly at 1-800-263-2535.
WARNING:
To reduce the risk of injury
from moving parts and/or
electrical shock, turn Power
Switch OFF and disconnect
polarized plug from electrical
outlet before performing
troubleshooting checks.
2 3