Filter
Top Products
4
How to use this guide
How to put it together
1.
2.
3.
Place Powerfoot on floor with rotating agitator brush on
floor surface.
Place Vacuum Body onto Powerfoot and push down firmly on
top corners of Vacuum Body while rocking slightly from side to
side. You will hear a ‘click’ when raised area on back of
Powerfoot enters opening on back of Vacuum Body.
Push long bolt through bottom hole on FRONT of lower body.
Place nut over end of bolt and hold in place while tightening
bolt with a phillips head screwdriver.
NOTE: If bolt will not go through hole easily, repeat step 1.
This User’s Guide has been designed to help you get
the utmost satisfaction from your BISSELL PowerClean
Upright Vacuum Cleaner. You’ll find assembly and
operating instructions, safety precautions, as well as
maintenance and troubleshooting instructions. Please
read this Guide thoroughly before assembling your
vacuum cleaner.
Pay particular attention to the assembly diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they go. Following
this User’s Guide will greatly enhance your ability
to get the most performance from your BISSELL
PowerClean for many years.
The only tool you’ll need to assemble your vacuum
cleaner is a Phillips head screwdriver.
Attach Vacuum Body to Powerfoot
4.
Align Handle with edges of upper Vacuum Body and press
down. You will hear it snap into place.
Attach Handle to Vacuum Body
WARNING:
Plastic bags or plastic
film can be dangerous.
To avoid danger of
suffocation, keep away
from babies and children.