Filter
Top Products
5
How to use your BISSELL
®
Upright Vacuum Cleaner
Index
Safety instructions . . . . . . . . . .2
Product view . . . . . . . . . . . . . . .3
How to put it together . . . . . .4-5
How to use your
upright vacuum cleaner . . . . . .5
Index . . . . . . . . . . . . . . . . . . . . .5
Using special tools . . . . . . . . . .6
Routine maintenance . . . . . .7-8
Troubleshooting . . . . . . . . . . . .9
Replacement parts . . . . . . . . . .9
Warranty . . . . . . . . . . . . . . . . .10
Customer Service . . . . . . . . . .10
Assemble Dust Bag
Unzip Cloth Bag.
Fold down top of new Dust Bag.
Grasp Bag Collar and push Collar firmly
over raised rib on Connector Tube.
Pushing too hard on the Collar may rip the
Dust Bag.
Tuck remainder of Dust Bag completely into
vacuum cleaner.
Lay it flat, top to bottom, without bunching.
Zip Cloth Bag closed.
Assembly is now complete.
8.
Powerfoot Height Adjustment
The Powerfoot/Rotating Floor Brush on your
BISSELL
®
Upright Vacuum can be adjusted to
clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust
to the lowest practical setting. If your cleaner is
difficult to push, adjust to the next higher setting.
1. Place Handle in Upright Position.
2. Slide Floor Surface Selector to desired setting.
■ HI - For plush pile or shag carpet.
■ LO - For short pile carpets and bare floors.
Handle Positions
Press the Handle Release Pedal with
your foot to place your Upright into
one of four cleaning positions.
1. Upright - For storage and above
floor cleaning with special tools.
2. Normal Cleaning - Use for most
household floor cleaning tasks.
3. Threshold Stop - Use for going
over thresholds or for vacuuming
over edges of area rugs.
4. Low Cleaning - Use for vacuuming
under low furniture such as tables,
chairs and beds.
Tip:
Before cleaning
under low
furniture, check
area first for
objects that
might harm the
unit or block the
Vacuum Hose.
1
2
3
4