Bissell 3302 Vacuum Cleaner User Manual


 
4
How to use this guide
This User’s Guide has been designed to help you get
the utmost satisfaction from your Go Vac Rechargeable
Cordless Sweeper. Enclosed you’ll find assembly instructions,
tips for all cleaning tasks, safety precautions, plus
maintenance and troubleshooting instructions.
Please read this Guide thoroughly before using your
Go Vac. Pay particular attention to the parts diagram,
assembly instructions, and part names. Following the
Guide will greatly enhance your ability to get the
most performance from your Go Vac for many years.
Quick and easy assembly
Assemble the Handle by screwing together the three (3) Metal
Extension Handles. Place the colored Handle Grip on top of the
metal extension assembly and twist clockwise until secure.
Screw the D-shaped End to the bottom of the Metal Extension
Handle assembly.
Place bottom D-shaped End into the D-shaped opening at the
top of the Go Vac. Push firmly until the button at the bottom
“clicks” into place in the opening.
Position Go Vac in Charging Base
(
if so equipped), making
sure that the Go Vac Charging Port fits securely over the
Electrical Contact Post on the Charging Base.
Plug the Charging Base cord into a standard electrical outlet.
The Indicator Light will glow red, showing that the unit is
charging.
NOTE: If you purchased Model 3301, the Charging Base is replaced by a
Charging Cord with Transformer Plug. The Transformer plugs into
standard electrical outlet (120v-60hz); plug the opposite end into the
port on the motor side of your Go Vac. Your Go Vac is now charging.
1.
2.
3.
4.
Before you start
Your Go Vac requires very little assembly. Remove it from the box and check it against the illustration to
familiarize yourself with the components listed. The exploded view drawing with part names will also be
helpful if you should need to order a part at a later time. Remember, components of your Go Vac may
vary depending on the model you purchased.
WARNING:
Electric/electronic
appliances should not
be subjected to extreme
temperatures or high
humidity. Do not store
your Go Vac in bathing
areas or close to stoves,
furnaces or radiators.
Tip:
Fully charge
unit before
using. (See
Charging the
battery, page 6.
Model 3301 Charging Cord with
Transformer Plug
Plug into Port on the Motor side
of your Go Vac