Bissell 3301 Vacuum Cleaner User Manual


 
WARNING: This product contains a nickel-cadmium (Ni-Cd) rechargeable
battery pack. According to Federal and State regulations, removal and proper
disposal of Ni-Cd batteries is required. For removal of the battery pack in your
GoVac, see instructions below:
1. IMPORTANT: Unplug charger.
2. Remove Handle and Dust Cup.
3. Remove (10) Phillips head screws on the bottom cover as shown in picture.
4. Separate top and bottom cover.
5. Remove wire connectors from the battery pack.
6. Keep Battery Pack together - DO NOT separate individual batteries.
For specific disposal instructions of batteries, please contact:
RBRC (Rechargeable Battery Recycling Corporation) 1-800-822-8837 or
visit the website: www.rbrc.com
7. Discard remainder of product.
7
Troubleshooting
Reduced Suction/No Suction.
Possible Causes Remedies
Dust Cup is full Empty debris from Dust Cup and clean Filter.
Not Powered/Underpowered.
Possible Causes Remedies
GoVac not charged thoroughly Make sure it has been properly plugged into an outlet
for the recommended amount of time.
See Charging the Battery on page 5.
If suggested solutions for this or any function of the GoVac do not correct the problem, call BISSELL Consumer Services.
Item Part No. Part Name
1 203-3540 Filter (2 Pack)
2 204-1100 DC Adapter
3 203-4480 Metal Extension Handle (4 Sections)
4 204-1101 Handle Grip
5 203-0660 Dust Cup
To order replacement parts using your VISA, MasterCard,
Discover or American Express, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or visit our website @
www.bissell.com
1
1
1
1
Replacement Parts
See the following instructions to dispose of the batteries after they have exceeded the battery life.
10 Screws
2
1
2
3
4
5