Filter
Top Products
www.bissell.com 800.237.7691
Operations
10
Cleaning your machine continued
2. Rinse front nozzle of any dirt and debris.
Remove portable spot cleaner from the
base of the machine.
Unscrew three screws with Phillips screw
driver and remove nozzle.
Rinse nozzle out at the faucet.
Place back onto the machine by hooking
the tabs into the holes on the bottom sides
of the machine. Secure with screws.
3. The inside of the end caps can be
wiped out with a clean paper towel,
or for a more thorough clean, the end
caps can be taken off and rinsed clean.
4. Any loose hair or debris can be pulled
from the brush rolls and thrown away. For
a more thorough clean, follow directions
on page 15 for removal of brush rolls.
Your machine is now ready to be stored.
Note: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing.
Freezing will damage internal
components and void the warranty.
Upright cleaning mode continued
2.
WARNING:
To reduce the risk of fire, elec-
tric shock or injury unplug from
outlet before servicing.
Tip:
Let all parts dry completely
and replace onto machine.