Bissell 25A3 Carpet Cleaner User Manual


 
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Assembly
6
Your PROheat comes in four, easy to
assemble components:
Handle Assembly
Upper Hose Rack
Lower Body
Lower Hose Rack
The only tool you will need to
assemble your cleaner is a Phillips
head screwdriver.
1. Slide handle assembly onto lower body
and secure with two long screws.
2. Attach upper hose rack to back of
handle assembly by pushing into open
slots and sliding down until it snaps into
place.
3. Attach lower hose rack by sliding in
place on lower body assembly and
securing with 2 short screws.
4. Attach Tough Stain tool to end of hose.
5. Wrap flex hose around hose rack and
secure it into notched out holder as
shown.
6. Keep flex hose locked in place with hose
secure latch.
WARNING:
Do not plug in your cleaner until
you have completely assembled
it per the instructions and are
familiar with all instructions and
operating procedures.
Tip: Deep cleaning carpeting
regularly can reduce dust and
allergens in your home.
1.
2.
3.
4.
5.
6.
Hose
Secure
Latch