Filter
Top Products
8
www.bissell.com 800.237.7691
Power cord storage
When you have finished using your BISSELL
Cleanview Helix, return it to the upright position
and store the power cord.
1. Turn vacuum cleaner off.
2. Unplug power cord by grasping the polarized
plug (NOT the cord) and disconnect from
outlet.
3. Loop power cord around cord wraps on side
of vacuum cleaner.
4. Clip molded plug to power cord to secure.
To maintain maximum cleaning performance, the
following maintenance steps must be performed:
1. Empty the dirt container when the dirt
reaches the “Full” line on the side.
2. Check the inner and outer circular filters and
the pre-motor filter at least once a month
and clean or replace as needed.
3. Replace the post-motor filter every six
months.
Note: More frequent filter cleaning or
replacing may be necessary if you are
vacuuming new carpet, fine dust, or have
allergy concerns. Follow the instructions on
the following pages to perform these simple
maintenance steps.
Operation
Maintenance and care
Tip:
For maximum cleaning
performance, check
and clean or replace all
filters as suggested.
WARNING:
To reduce the risk of
electric shock, turn
power switch OFF and
disconnect polarized
plug from electrical outlet
before performing
maintenance or
troubleshooting checks.
NOTICE:
While vacuuming, certain
carpets and low humidity
conditions may generate small
static discharges. The discharges
are entirely harmless and are
not associated in any way with
the main power supply.