Filter
Top Products
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Operations
10
Carpet cleaning
1. Fill the 2-in-1 Water Tank. Remove the tank
from the base of the machine by lifting up
the tank carry handle. Carry like a bucket
to the sink.
1a. Unlatch the top of the tank from the
bottom by lifting up on the tank latch
located on the back of the tank.
1b. Remove the top of the tank by lifting up
on the handle.
Note how the lip on the top tank
separates from the groove in the
bottom tank. This placement is
important when putting the tank
back together.
1c. Fill the heavy duty bladder with clean
hot tap water.
*Do not boil or microwave water
as it can destroy the bladder.
1d. Leaving the filled bottom of the tank on
a flat surface, only maneuver the top of
the tank. To attach the top part of the
tank to the bottom, carefully hook the lip
on the top tank into the groove on the
bottom tank.
1e. Fasten tanks together by securing the
latch in the back.
Note: Remember to secure the tank
latch in the back and test to make
sure it is secure before picking up
the tank.
2. Remove formula tank from back of
machine.
3. Fill the formula tank by first unscrewing
the cap and insert. Always use genuine
BISSELL 2X formulas to maximize clean-
ing and for the safety of your machine.
Fill with water to WATER line and then
fill up to FORMULA line with BISSELL 2X
Concentrated formula. Replace formula
tank.
4. Set Custom Clean Dial. Simply choose
one of the 4 settings (heavy traffic,
normal clean, light clean, or water
rinse).
5. Set ReadyTools Dial to the floor cleaning
setting.
3.
1.
1b.
1a.
1c.
1d.
1e.
4. 5.
2.