Bissell 2050 Vacuum Cleaner User Manual


 
5
This User’s Guide has been designed to help you get the
utmost satisfaction from your BISSELL QuickSteamer Lightweight
Deep Cleaner. You’ll find assembly and operating instructions,
safety precautions, as well as maintenance and troubleshooting
instructions. Please read this Guide thoroughly before assembling
your cleaner.
Pay particular attention to the product diagram, assembly instructions,
and part names. Locate and organize all parts before assembly. Famil-
iarize yourself with the parts and where they go. Following this User’s
Guide will greatly enhance your ability to get the most performance
from your BISSELL QuickSteamer for many years.
Your QuickSteamer comes in two, easy to assemble components:
Detachable Handle Assembly
Lower Body
Your QuickSteamer is packaged as two primary components - the
Lower Body and the Handle Assembly.
Your QuickSteamer assembles
easily in two quick steps. The only tool you’ll need to assemble your
cleaner is a Phillips head screwdriver.
Attach Handle to Lower Body
Slide Handle Assembly (with attached Quick Release Cord
Wrap) down into Lower Body until it will go no further.
Secure with screw
Secure by placing one (1) Phillips head screw (supplied)
into rear of Handle Assembly. Tighten with screwdriver
until secure.
Clean Water Tank - holds 1/2-gallon of hot water cleaning solution.
Dirty Water Tank - holds 1/2-gallon of dirty water.
Power Cord - for storage, wrap Power Cord around Upper and
Lower Cord Wraps, and secure Plug to Cord with molded clip
Plan activities to give carpet time to dry.
Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
How To Use This Guide
How To Put It Together
1.
2.
1.
2.
Other Components
1.
2.
How to use your BISSELL QuickSteamer
How to begin
WARNING:
To reduce the risk of fire, use
only BISSELL Advanced
Cleaning Formulas for Deep
Cleaning Machines.
Use of cleaning formulas
that contain lemon or
pine oil may damage this
appliance and void warranty.
Chemical spot cleaners or
solvent-based soil removers
should not be used. These
products may react with the
plastic materials used in
your QuickSteamer,
®
causing cracking or pitting.