Bissell 1960 Vacuum Cleaner User Manual


 
5
This User’s Guide has been designed to help you get the utmost
satisfaction from your BISSELL QuickSteamer Lightweight Deep
Cleaner. You’ll find assembly and operating instructions, safety pre-
cautions, as well as maintenance and troubleshooting instructions.
Please read this Guide thoroughly before assembling your cleaner.
Pay particular attention to the product diagram, assembly instructions,
and part names. Locate and organize all parts before assembly.
Familiarize yourself with the parts and where they go. Following
this User’s Guide will greatly enhance your ability to get the most
performance from your BISSELL QuickSteamer for many years.
Your QuickSteamer assembles quickly and easily. The only tool
you will need to assemble your deep cleaner is a Phillips Head
( ) screwdriver.
Your QuickSteamer is packaged with the following items:
Strain Reliever Handle
Upper Body
Lower Body with Dirty Water Tank
Clean Water Tank
2 Long/Partially Threaded Screws
1 Short/Fully Threaded Screw
Slide Upper Body into Lower Body.
Secure with 2 Long/Partially Threaded Screws.
Slide Strain Reliever Handle down into Upper Body until it
will go no further.
Secure with Short/Fully Threaded Screw.
Place Clean Water Tank on back of unit.
Clean Water Tank - holds 1/2-gallon of hot water and cleaning solution.
Dirty Water Tank - holds 1/2-gallon of dirty water.
Power Cord - for storage, wrap Power Cord around Upper and
Lower Cord Wraps, and secure Plug to Cord with molded clip.
How To Use This Guide
How To Put It Together
1.
2.
Other Components
1.
2.
3.
4.
5.
3.
4.
5.