Filter
Top Products
www.bissell.com 800.237.7691
9
Operations
Maintenance and care
Carpet Refresher Attachment cont
1. Place the swivel mop head, with mop pad
attached, in the carpet refresher attachment.
NOTE: The PowerFresh™ Steam Mop rests
in the carpet refresher attachment and
may not stay attached to the swivel mop
head. It is meant to glide over the carpet.
2. Fill the water tank with water. Begin refresh-
ing your carpet or rug by pushing the
PowerFresh™ Steam Mop in a forward and
backward motion, releasing steam as you go.
3. When you have finished refreshing your
carpet or rug, unplug the steam mop and
remove from the carpet or rug.
NOTE: Move the PowerFresh™ Steam
Mop and carpet refresher attachment in
a continuous motion until you are fin-
ished. This product is not intended to be
used as a carpet cleaner, only a carpet
refresher or deodorizer. Never attempt
to use the PowerFresh™ Steam Mop
on carpet without the carpet refresher
attachment in place. DO NOT leave the
mop in a stationary position.
When you're done
1. Unplug power cord from outlet.
2. Carefully remove the mop pad using the
Quick Release™ tab from the mop head.
The mop pad and lower assembly may
be hot. Remove Spring Breeze Freshening
Disc from mop pad.
3. Any water remaining in the water
tank should be emptied prior to
machine storage.
4. Mop pad can be machine washed in
warm water. Use only liquid detergents.
Do not use fabric softeners or bleach.
For best results, air dry.
5. Wrap power cord around quick release
cord wrap on back of PowerFresh™
Steam Mop.
6. Wipe all surfaces of PowerFresh™ Steam
Mop with a soft cloth. Store upright
in a protected, dry area.
CAUTION:
Upright storage of the
PowerFresh Steam Mop
with a wet mop pad may
result in the formation of
white marks on your floor.
To remove the white marks,
clean area with vinegar.