Filter
Top Products
7
Attach Mop Pad
A. Set Swivel Head in Mop Pad.
B. Tighten Mop Pad by pulling on cord while pressing on
Toggle.
Fill the Water Tank
A. Remove Tank by lifting straight up and away from
unit.
B. Unscrew cap at bottom of Water Tank, remove the
insert assembly.
C. Fill Water Tank with cool tap water.
D. Replace the insert assembly, replace and tighten cap.
E. Replace Water Tank by lining up vertical guides and
gently sliding tank into place.
Twist the Quick Release Cord Wrap clockwise to unwrap
the Power Cord completely and plug into a 120-Volt
grounded outlet as described on the Important Safety
Instructions, page 3.
The Ready Light will illuminate when the Steam Mop is
ready for cleaning.
WARNING:
Never put descaling, aro-
matic, alcoholic, or deter-
gent products into the
steam cleaner, as this
may damage it or make it
unsafe for use.
Operations
Getting Ready
1.
2.
3.
4.
1A
2A
2B
2B
2E
1B