Bissell 1724 Carpet Cleaner User Manual


 
10
Troubleshooting
Cleaner won’t run.
Possible Causes Remedies
Power Unit not plugged in Check electrical plug
Blown fuse/tripped breaker Replace household fuse or Reset
Breaker
Call BISSELL Customer Service
Reduced spray or no spray
Possible Causes Remedies
Spray Nozzle clogged Clean Spray Nozzle
Solution Tank empty Check/Refill Tank
Solution Tank outlet clogged Clean outlet at bottom of Solution Tank
Pump needs priming Push firmly on Solution Tank front
while depressing Spray Trigger
Vacuum won’t pick up cleaning solution
Possible Causes Remedies
Poor Upholstery/Carpet Tool Reposition Upholstery/Carpet Tool on
position surface, follow recommended cleaning
procedures
Collection Tank is full Empty Collection Tank
Upholstery/Carpet Tool Brush worn Replace with new Brush
Excess solution in Vacuum Flex Hose Lift Tool and point upwards to allow water
in Hose to flow into the Collection Tank
Incorrect switch position on TurboBrush Reposition switch to “Suction” Position
Excessive Foam in the Collection Tank
Possible Causes Remedies
Residue left in carpet or fabric Flush carpet by using clear water in
form prior cleaning Solution Tank
Check Tank often/empty as necessary
Incorrect cleaning formula Use BISSELL Little Green formula only
TurboBrush attachment-Brush will not turn
Possible Causes Remedies
Incorrect switch position on TurboBrush Reposition switch to “Brush” position
WARNING:
To reduce the risk of
injury from moving parts
and/or electrical shock,
turn Power Switch OFF
and disconnect polarized
plug from electrical out-
let before performing
troubleshooting checks.