Filter
Top Products
Bissell PowerSteamer® ProHeat™ Series Service Center Repair Guide
Printed February, 2001
1/30/2004 (Revision 1)
8
LOWER HANDLE ISSUES
1. Handles must be reassembled to ensure that hoses are not pinched.
2. Clear any blockages in the heater inlet and outlet lines with a finishing nail or similar
object.
3. To open the heater, remove screws located on its rear panel.
HEATER ISSUES
1. Check heater function by attaching a 120-volt source to heater terminals and waiting 30
seconds -- unit should get hot.
2. Heaters have an extremely low failure rate
-- make absolutely certain a heater is broken
before ordering a new one.
CLEARVIEW ISSUES
1. Make certain the "hook" is placed properly into the alignment slot.