Filter
Top Products
4
1.
2.
Handle Assembly. Slide Handle Assembly down
onto Lower Chassis until it will go no further. Secure
by placing two (2) Phillips Head bolts into front
of Handle Assembly and into hex nuts at back of
Lower Chassis unit, as shown.
Power Cord. Wrap Power Cord around upper and
lower Cord Holders, and secure Plug to Cord with
molded clip.
NOTE: Your POWERSTEAMER
®
features a Cord
Quick-Release. To easily release Power Cord, rotate
upper Cord Holder and remove Cord. Use clip at
back of Handle Assembly to secure Power Cord
when using cleaner.
Assembly is now complete.
Your POWERSTEAMER
®
is packaged as two
primary components–the Lower Chassis and the
Handle Assembly.
The only thing you will need to assemble your cleaner
is a Phillips head screwdriver.
This User’s Guide has been designed to help you get
maximum satisfaction from your POWERSTEAMER
®
Upright Deep Cleaner. You’ll find assembly
instructions for all cleaning tasks, safety
precautions, pre-cleaning tips, and maintenance
and troubleshooting instructions. Please read this
Guide thoroughly before assembling your cleaner.
How to use this guide
Pay particular attention to the assembly diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they go.
Following the Guide will greatly enhance your
ability to get top performance from your cleaner
for many years.
How to put it together