Bionaire BT90R Fan User Manual


 
PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including
the following:
• Use the fan only for purposes described in the
instruction manual.
• To protect against electrical shock, do not
immerse the fan, plug or mains cable in water
or spray with liquids.
Close supervision is necessary when any
appliance is used by or near children.
Unplug from the electrical outlet when not in use,
when moving the fan from one location to another.
•Avoid contact with any moving parts.
Do not operate in the presence of explosives
and/or flammable fumes.
Do not place the fan or any parts near an open
flame, cooking or other heating appliance.
Do not operate any appliance with a damaged
mains cable, plug, after the appliance
malfunctions, or has been dropped/damaged
in any manner.
The use of attachments not recommended or
sold by the appliance manufacturer may
cause hazards.
Do not let the mains cable hang over the edge
of a table or counter, or come into contact with
hot surfaces.
•To disconnect from the electrical supply, grip
the plug and pull from the wall outlet. DO NOT
pull on the mains cable.
Always use on a dry, level surface.
Do not operate without the fan grills properly
in place.
This product is intended for household use ONLY
and not for commercial or industrial applications.
Should the appliance stop working, first check
the fuse in the plug (UK only) or fuse/circuit breaker
at the distribution board is operating, before
contacting the manufacturer or service agent.
If the supply cord or plug is damaged, it must
be replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid hazard.
The appliance contains no user serviceable
parts and should the product suffer damage or
breakdown it must be returned to the
manufacturer or its service agent.
Do not use outdoors.
The fan should not be operated without its
base fitted.
The fan should not be operated laying on its side.
Under the environment with electrical fast
transient, the product may malfunction and
require user to reset the product.
MISSING A PART FOR YOUR FAN?
Please call 0800 052 3615 for assistance.
ASSEMBLY INSTRUCTIONS
Assemble Base. Secure together with 3 screws.
Refer to Figure 2.
OPERATING INSTRUCTIONS for
Remote Control and Control Panel
Please remove the protection sticker from the
remote control battery before operation.
The Remote Control requires 1 CR2025, 3V
Lithium battery for operation. Remove battery
before discarding the remote control. To access
Remote Control Storage refer to Figure 3.
A.Power
Press = On, Off
B.Speed Settings
Press = I, II, III
C.Oscillation Control
Press = Oscillation On, Off
D.Timer Control
Press = Turns Off in 2, 4, 8 hours
E.Natural Breeze
Press = Natural Breeze
Natural Breeze Mode will cycle through the
fan speed settings randomly.
CLEANING AND MAINTENANCE
Always unplug the fan before cleaning.
Do not allow water to drip on or into the fan
motor housing.
FITTING A REPLACEMENT PLUG FOR
U.K. AND IRELAND ONLY.
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by a
plug of the correct type. Please refer to
"Installation of a plug" below.
INSTALLATION OF A PLUG
APPLICABLE TO U.K. AND IRELAND
The wires in this mains lead are coloured in
accordance with the following code:
Blue - Neutral
Brown - Live
This appliance is fitted with a 13 amp plug.
The fuse should be rated at 3 amps and ASTA
approved to BS1362.
However if the plug is unsuitable, it should be
removed from the supply cord and an appropriate
U.K. and IRELAND
2
Fig. 11
Fig. 44
BT90R
Fig. 33
A
B
C
D
E
E
C
B
D
A
Fig. 22
BT90RI05MLM2.qxd 4/5/06 11:47 Page 4