Filter
Top Products
TuneBase
™
Direct with Hands-Free
11
SECTIONS 1 2 654Table of Contents 3
USE YOUR TUNEBASE
1. Make sure your car stereo and TuneBase
are powered off.
2. Connect the 3.5mm audio cable to the
aux-in jack on your car stereo.
3. Connect the audio cable to the audio-out
jack on the TuneBase.
Connect Your TuneBase to Your Car Stereo
The 3.5mm audio-out jack on the TuneBase lets you connect to the aux-in jack on your car
stereo. You can also use the jack to connect to your car’s cassette tape player using a tape
adapter (sold separately).
4. Power on your car stereo and TuneBase.
5. On your car stereo, change the source
to “aux”.
6. You are now ready to listen to your iPod.