Beko LG-BKE 6700 D, LG-BKE 6800 D Air Conditioner User Manual


 
The left/right(Horizontal Airflow) can be adjusted by using the remote control.
Press the Start/Stop button to start the unit.
Open the door on the remote control. Press the Airflow Direction Start/Stop button
and the louvers will swing left and right. Press the Horizontal Airflow Direction
Control Button again to set the vertical louver at the desired airflow direction.
Operating Instructions
18 Room Air Conditioner
AUTO CLEAN
1
1
2
3
4
5
2
The up/down airflow (Vertical Airflow) can be
adjusted by using the remote control.
Press the Start/Stop button to start the unit.
Press Chaos Swing button and the louvers will
swing up and down. Press the Chaos Swing
button again to set the horizontal louver at the
desired airflow direction.
o
Always use the remote control to adjust the
up/down airflow direction. Manually moving the
vertical airflow direction louver by hand, could
damage the air conditioner.
o
When the unit is shut off, the up/down airflow
direction louver will close the air outlet vent of the
system.
To adjust left/right(Horizontal Airflow)
direction
Caution : Ensure that the
unit is turned off before adjusting
the horizontal airflow direction
control. Carefully open vertical
louver to allow access to the
horizontal airflow direction.
Adjust the left/right airflow
direction by hand.
NOTICE
Vertical Airflow Direction Control
Auto-Clean
Whenever you press the Auto Clean button, Auto Clean Function will be reserved and
cancelled.
Auto Clean function works before and after cooling or dehumidification mode. For details,
refer to the below points.
When the unit is started after the reservation of Auto Clean ,the Cool Start function
operates and indoor Fan is started after 20 seconds.
When you press Start/Stop button to turn off the unit after the you have reserved Auto
Clean function, the air-conditioner circulates the indoor air in the Auto Clean mode with
no more Cooling or Dehumidification operation.
For Cooling only model, it lasts for 30 minutes for Heat pump model, for 16 minutes.
If you press the auto clean button again during the product operation, Auto Clean
function will be cancelled.
o
This function is to remove unpleasant smells from mold and other bacteria in the air-conditioner, and
to remove humidity automatically during humidly summer, which supplies the indoor with purified air.
NOTICE
Horizontal Airflow Direction Control (Optional)
For this operation
C
0
appears on the display. (Plasma model only)
If you press the CHAOS swing button, at first 5 cycles,
the horizontal louver will swing up and down at maximum
angle. Then, the vertical airflow direction is changed
automatically based on the CHAOS algorithm to distribute
the air in the room evenly and at the same time to make
the human body feel most comportable, as if enjoying
a natural breeze.