Filter
Top Products
4 l
EN
3
Functions Of Each Part 1
1.The Switch
Press the ON side of the switch to start the
motor.
To stop the motor.press the OFF side of the
switch.
2.The Floor Nozzle
The two-way floor nozzle is with two
positions.
FLOOR: For vacuuming wooden
floors,linoleum or plastic covered
floor.
RUG: For vacuuming rugs and
carpets.
For vacuuming wooden
floors,linoleum or plastic covered
floor.
Use the crevice nozzle for corner or
edge places. If the water is much on
the floor, you could also use the long
crevice nozzle to absorb.
Use the round nozzle for furniture,
curtain, ceiling, etc.
3.Suction Control
• Turn the speed control knob to adjust the
power & suction power.
The power get minimum when turn the knob
to “MIN”, and the power get maximum when
turn the knob to “MAX”.
• Move the regulator plate on the hose
handle to adjust the suction power.
The suction power gets weak when opened,
but normally it is used in closed condition.
4.The Blower
Use the blower to blow out dust from
behind furniture.on bric-a-brac, inside
radios and TVs.and to clean out hoses.
• Attach the hose to the exhaust outlet.
• Attach the crevice tool to the end of the
hose.
• Press the ON side of the switch to start the
motor.