Filter
Top Products
5
1. When the dust full indicator
turns to red, it is time to clean the
dust bag or replace a new bag. To
do that, please follow the instruc-
tion :
(a) Open the front cover by press-
ing the clip;
(b) Take out the bag holder to
remove the dust bag;
(c) For cloth bag ,you can pull out
the clip bar in the bottom of the
dust bag and remove the dust,
then you can relocate the cloth
bag for next time using.
-If the cloth bag is too dirty, use
clear water to wash it. Air dry the
cloth bag only.
-If the cloth beg is damaged,
replace a new one.
(d) For paper bag, tip the rubbish
out of the bag or throw the full
bag away and replace a new one.
Then put back the bag and holder
into the vacuum cleaner in correct
position.
(e) Close the front cover.
NOTE:
1. The front cover can’t be closed
unless the dust bag is installed in
right position.
2. The motor protection filter
should be removed and rinsed
by clear water (air dry only)twice
a year or whenever it is visible
clogged. If the filter is damaged,
replaced a new filter.
3. The exhaust filter ( post motor
filter) should be cleaned twice a
year: to do that, unclip the grill and
shake the filter to clean the dust
. Then relocate the filter and clip
the grill. If the filter is damaged,
replaced a new filter.
WARNING: Turn off and unplug
the machine before any mainte-
nance or Replacement.!
Maintenance and Cleaning
4